Print Design Guide
The print design guide: how to prepare a file that prints correctly
Most print problems are decided before the file ever reaches a press. A logo placed too close to the trim edge, a photograph pulled off a phone at 72 dpi, or a bright brand blue built in RGB will all disappoint on paper even though they looked fine on screen. This guide walks through the settings that matter, in the order you would actually set them up.
1. Start at the finished size, in the right colour mode
Set your document to the final trim size and choose CMYK as the colour mode from the very first click. Converting from RGB later shifts colours, sometimes dramatically: vivid oranges, deep blues and fluorescent greens are the usual casualties. If a specific brand colour matters, give us the Pantone reference and we will match it as closely as four-colour process allows.
Set resolution to 300 dpi at final size for anything photographic. Vector artwork (type, logos in EPS, SVG or PDF) stays sharp at any scale, which is why vector originals are always preferable to a screenshot of a logo.
2. Add bleed, and keep content inside the safe area
Commercial printing trims stacks of sheets to size, and the blade can land slightly inside or outside the intended line. To make sure your background colour or photo reaches the edge with no white sliver, extend it 0.125 inch (3 mm) beyond the trim on every side. That extension is the bleed.
Keep text, logos and anything you would not want clipped at least 0.125 inch inside the trim. That is the safe margin. A business card gives you very little room, so build the layout knowing the outer eighth of an inch may disappear.
3. Build it in the right software
Professional results come from vector-capable layout tools: Adobe InDesign or Illustrator, Affinity Publisher or Designer, Scribus, or Canva at print settings. Word and PowerPoint can work for simple jobs but often mangle bleed and font embedding. Whatever you use, export to PDF/X-1a or PDF/X-4 with marks and bleed switched on.
4. Embed fonts and flatten transparency
Outline or embed every font before export. A missing font is replaced with something else at the printer's end, and nobody notices until the pallet arrives. Also flatten transparency and drop shadows, which is what PDF/X-1a does automatically.
5. Check the file before you upload
When in doubt, ask before you print
We check files before production and will flag anything that looks wrong. A two-minute email now is cheaper than reprinting a thousand cards. Call 1-833-24-PRINT or send the file and we will tell you what we see.